Model 06-1246
Checks:
Rotors – Stators – Armatures – Isolators – Brush Holders – Field Coils – Solenoids – Coils – Etc.
Checks:
Rotors – Stators – Armatures – Isolators – Brush Holders – Field Coils – Solenoids – Coils – Etc.
AT: 50 – 250 – 500 – 1000V (Optional)
Checks:
Rotors – Stators – Armatures – Isolators – Brush Holders – Field Coils – Solenoids – Coils – Etc.
This microprocessor controlled tester will:
Quality test the performance of the isolation of your electrical components at selected voltage.
Perform an audio and visual test on a leak to ground at 50V-250V-500V-1000V AC.
Detect arcing and indicates by flashing LED and intermittent beep.
Once the voltage is selected and the foot switch activated, a beep will be heard, if a leak is detected LED will glow.
The red LED is identified from 1 to 10 and each have an increments of 1 mA.
If the ark is detected an corresponding LED will flash rapidly and a buzzer will pulse.
Foot switch and safety probes are included.
No calibration necessary.
11” X 11” X 4.5” 14 LBS
One year warranty